#include <TestProject/RNG/BaseData.h>
#include <TestProject/RNG/Generator.h>
#include <TestProject/RNG/RandT.h>
#include <TestProject/RNG/read_csv.hpp>
BaseData::BaseData data1;
// ReadCSV::DoubleData ddata("D102-1#酸槽数据.csv"); ///< 2列:入口流量，出口流量
ReadCSV::DoubleData
    ddata("数据毛刺-仿真.csv"); ///< 4列:实际速度，实际电流，设定速度，spderr
ReadCSV::DoubleData gdata("毛刺数据.csv"); ///< 6列:RW_o_Drv_ActSpd
                                           ///< RW_o_Drv_Current
                                           ///< RW_o_Drv_TQ_Ref
                                           ///< RW_o_Drv_SpdRegInt
                                           ///< RW_o_Drv_SpdErr	RW_o_Drv_AVF
ReadCSV::DoubleData spbdata(
    "转矩减小-速度偏差大-仿真2.csv"); ///< 4列:实际速度，实际电流，实际转矩，设定速度
ReadCSV::DoubleData
    liquid_data("液位.csv"); ///< 4列:实际速度，实际电流，实际转矩，设定速度
// ReadCSV::IntData idata("D302-压辊数据.csv"); ///< 2列:阀动作，接近开关信号
ReadCSV::IntData
    idata("C308仿-压辊数据.csv"); ///< 3列:阀动作- 开，接近开关信号-开,阀动作-关
ReadCSV::DoubleData
    ddata_cn("D102-3#BR电流数据.csv"); ///< 4列:2/3/4电流,速度设定值
ReadCSV::DoubleData
    ddata_cb("D102-3#BR异常电流数据.csv"); ///< 4列:2/3/4电流,速度设定值

ReadCSV::IntData car_data("D302-2#小车减速位.csv"); ///< 2列：位置，接近开关
ReadCSV::DoubleData std1_wr("D302-1#机架正弯.csv"); ///< 2列：给定，反馈
ReadCSV::DoubleData std5_wr("D302-工作辊正弯DS.csv"); ///< 2列：给定，反馈
ReadCSV::DoubleData loop3("D302-3#活套1-5电流.csv"); ///< 5列：1-5电机电流
ReadCSV::DoubleData c308fur2col("C308速度毛刺仿真.csv"); ///< 2列 正常 毛刺
ReadCSV::IntData
    std4_cr("D102-4#机架上中间辊窜辊.csv");    ///< 5列：编码器-4个窜动
ReadCSV::IntData loop8_bool("D102-loop8.csv"); ///< 2列：DS,OS

Generator::Generator() {
  stime = chrono::system_clock::now();
  logger_ = std::make_unique<LOG>("Generator");
}
Generator::~Generator() {
  // if (!map_tables_.empty()) {
  //   auto iter = map_tables_.begin();
  //   while (iter != map_tables_.end()) {
  //     delete iter->second;
  //     iter->second = nullptr;
  //     map_tables_.erase(iter++);
  //   }
  // }
  for (auto &it : m_mapfix) {
    if (it.second != nullptr) {
      delete it.second;
    }
  }
}
bool Generator::wtite_in_shm(int event_no) {
  try {
    // if (map_tables_.find(event_no) == map_tables_.end()) {
    //   map_tables_[event_no] =
    //       new CMemTable<PLC_DATA>(StringHelper::ToString<int>(event_no),
    //       100);
    // }
    // logger_->Debug() << "wtite_in_shm Test--1" << endl;
    if (m_mapfix.find(event_no) == m_mapfix.end()) {
      m_mapfix.insert(
          make_pair(event_no, new CMemFix<PLC_DATA>(std::to_string(event_no),
                                                    TEL_CACHE_SIZE)));
    }

    binary_tele.ReBuild(event_no);
    int size = binary_tele.size();
    // binary_tele.Print();
    size_t data_index =
        ((chrono::system_clock::now() - stime).count() / (size_t)pow(10, 6)) /
        20; ///<时间-下标
    logger_->Debug() << "wtite_in_shm Test--2"
                     << "---data_index:" << data_index << endl;
    for (int i = 0; i < size; i++) {
      if (binary_tele[i].type[0] == 'b') {
        /*bool量*/
        if (binary_tele[i].length != '1') {
          binary_tele[i] = RandT::randomBool();
          if (strcmp(binary_tele[i].item, "3G-DSA-B01-01B") == 0) {
            /*2#张力辊压辊打开*/
            binary_tele[i] = (float)idata(data_index, 0);
          } else if (strcmp(binary_tele[i].item, "3G-PX-B01-01") == 0) {
            /*2#张力辊压辊打开位*/
            binary_tele[i] = (float)idata(data_index, 1);
          } else if (strcmp(binary_tele[i].item, "3G-DSA-B01-01A") == 0) {
            /*2#张力辊压辊关闭*/
            binary_tele[i] = (float)idata(data_index, 2);
          }

          else if (strcmp(binary_tele[i].item, "ENT_DR_2R22_limi") == 0) {
            /*No.2入口钢卷小车-后退极限接近开关*/
            binary_tele[i] = (float)car_data(data_index, 1);
          } else if (strcmp(binary_tele[i].item, "ENT_DR_2R11_act") == 0) {
            /*4#机架窜辊动作1*/
            binary_tele[i] = (float)std4_cr(data_index, 1);
          } else if (strcmp(binary_tele[i].item, "ENT_DR_2R12_act") == 0) {
            /*4#机架窜辊动作2*/
            binary_tele[i] = (float)std4_cr(data_index, 2);
          } else if (strcmp(binary_tele[i].item, "ENT_DR_2R11_limi") == 0) {
            /*4#机架窜辊动作3*/
            binary_tele[i] = (float)std4_cr(data_index, 3);
          } else if (strcmp(binary_tele[i].item, "ENT_DR_2R12_limi") == 0) {
            /*4#机架窜辊动作4*/
            binary_tele[i] = (float)std4_cr(data_index, 4);
          } else if (strcmp(binary_tele[i].item, "ENT_DR_2_run") == 0) {
            /*入口活套-No.8摆动门传动侧关闭极限接近开关*/
            binary_tele[i] = (float)loop8_bool(data_index, 0);
          } else if (strcmp(binary_tele[i].item, "ENT_DR_2_Ft") == 0) {
            /*入口活套-No.8摆动门操作侧关闭极限接近开关*/
            binary_tele[i] = (float)loop8_bool(data_index, 1);
          }

        } else {
          logger_->Error() << "event_no:" << event_no << ",数据项："
                           << binary_tele[i].chinese
                           << ",item:" << binary_tele[i].item
                           << "类型长度不匹配,"
                           << "type:" << binary_tele[i].type
                           << ",lenth:" << binary_tele[i].length << std::endl;
        }
      } else {
        /*模拟量*/
        strcpy((char *)binary_tele[i].value, binary_tele[i].defaultValue);
        float dataN = binary_tele[i];
        binary_tele[i] = float(dataN + RandT::RandT(-0.01, 0.01));

        if (strcmp(binary_tele[i].item, "BR1_1_V_act") == 0) {
          /*1#张力辊1#辊 实际速度*/
          binary_tele[i] =
              (float)binary_tele[i] + (float)c308fur2col(data_index, 1);
        } else if (strcmp(binary_tele[i].item, "BR1_2_V_act") == 0) {
          /*2#张力辊1#辊 设定速度*/
          binary_tele[i] =
              (float)binary_tele[i] + (float)c308fur2col(data_index, 0);
        } else if (strcmp(binary_tele[i].item, "BR2_1_V_act") == 0) {
          /*2#张力辊1#辊 实际电流*/
          binary_tele[i] =
              (float)binary_tele[i] + (float)c308fur2col(data_index, 0);
        } else if (strcmp(binary_tele[i].item, "BR2_2_V_act") == 0) {
          /*2#张力辊2#辊 实际速度*/
          binary_tele[i] =
              (float)binary_tele[i] + (float)c308fur2col(data_index, 1);
        } else if (strcmp(binary_tele[i].item, "BR2_2_I_act") == 0) {
          /*2#张力辊2#辊 实际电流*/
          binary_tele[i] = (float)spbdata(data_index, 1);
        } else if (strcmp(binary_tele[i].item, "BR2_2_TQ_act") == 0) {
          /*2#张力辊2#辊 实际转矩*/
          binary_tele[i] = (float)spbdata(data_index, 2);
        } else if (strcmp(binary_tele[i].item, "IW_3G_LV_J02_03") == 0) {
          /*入口液压站液位*/
          binary_tele[i] = (float)liquid_data(data_index, 0);
        } else if (strcmp(binary_tele[i].item, "TCM-4-82-BDRef-1-118") == 0) {
          /*1#机架工作辊正弯辊压力给定*/
          binary_tele[i] = (float)std1_wr(data_index, 0);
        } else if (strcmp(binary_tele[i].item, "TCM-4-82-BD-1-101") == 0) {
          /*1#机架工作辊正弯辊压力反馈*/
          binary_tele[i] = (float)std1_wr(data_index, 1);
        } else if (strcmp(binary_tele[i].item, "TCM-72-150-BDRef-5-134") == 0) {
          /*5#机架工作辊DS正弯辊压力给定*/
          binary_tele[i] = (float)std5_wr(data_index, 0);
        } else if (strcmp(binary_tele[i].item, "TCM-72-150-BD-5-117") == 0) {
          /*5#机架工作辊DS正弯辊压力反馈*/
          binary_tele[i] = (float)std5_wr(data_index, 1);
        } else if (strcmp(binary_tele[i].item, "ENT_BR_4R1_torfbk") == 0) {
          /*3#活套1#电机电流*/
          binary_tele[i] = (float)loop3(data_index, 0);
        } else if (strcmp(binary_tele[i].item, "ENT_BR_4R2_torfbk") == 0) {
          /*3#活套2#电机电流*/
          binary_tele[i] = (float)loop3(data_index, 1);
        } else if (strcmp(binary_tele[i].item, "ENT_BR_4R3_torfbk") == 0) {
          /*3#活套3#电机电流*/
          binary_tele[i] = (float)loop3(data_index, 2);
        } else if (strcmp(binary_tele[i].item, "ENT_BR_4R3_curfbk") == 0) {
          /*3#活套4#电机电流*/
          binary_tele[i] = (float)loop3(data_index, 3);
        } else if (strcmp(binary_tele[i].item, "ENT_BR_4R1_curfbk") == 0) {
          /*3#活套5#电机电流*/
          binary_tele[i] = (float)loop3(data_index, 4);
        } else if (strcmp(binary_tele[i].item, "ENT_BR_4R2_curfbk") == 0) {
          /*4#机架上中间辊窜辊编码器*/
          binary_tele[i] = (float)std4_cr(data_index, 0);
        } else if (strcmp(binary_tele[i].item, "ACD-3-42-FQ-2") == 0) {
          /*3#酸槽出口流量 ---Test*/
          binary_tele[i] = (float)RandT::randomBool();
        } else {
          // logger_->Debug() << "test:" << binary_tele[i].item
          //                  << ",value:" << binary_tele[i] << endl;
        }

        // logger_->Debug() << "vale:" << binary_tele[i].value << "," << dataN
        //                  << endl;
      }
    }
    // binary_tele.Print();
    char *buff = binary_tele.GetTeleData();
    // this->logger_->Debug() << buff << endl;
    // map_tables_[event_no]->push((PLC_DATA*)buff);
    m_mapfix[event_no]->push((PLC_DATA *)buff);
    // ((BinaryTele*)buff)->Print();
    return true;
  } catch (const std::exception &e) {
    logger_->Error() << "wtite_in_shm Error!" << e.what() << std::endl;
    return false;
  }
}